Time Required. An awesome member of our community made this guide.

Forget acer iconia tab 10 a3 a40 a6002 lcd displej infinixcoolpadx

It is not managed by iFixit staff. It is not difficult. There are no resisting connectors. It takes about 2 hours, as removing the glued touchscreen could be quite long Buy these tools.

Start to unclip the back cover inserting a plastic opening tool from microSD connector. Gently pull up the flex cable to unstick it from the metal plate and from the battery pack.

For the A3-A11 3G model, the cellular board is placed just over the flex cable, where sticked to the metal plate.

Push the cable connector with a spudger, at both of its extremity. Or with a large flat one on the gold part. Do not use excessive force. If it does not work, you probably are not correctly placed.

Do not use excessive force to peel coper tapes off the metal plate. Doing so may tear the coper. Do not use excessive force to peel the aluminium tape off the metal plate.

Doing so may tear the aluminium. Release the touchscreen circuit board from the adhesive securing it to the display below. Yellow arrows : only two small clip still retain the metal plate all screws were removed during previous steps.

Blue arrows : lift up the metal plate until pins are released blue circles. Orange arrows : pull towards you the metal plate to release the plate from top cleats.

The touchscreen is strongly sticked to the frame with a foamed double-sided tape.

Blade acer iconia tab 10 a3 a40 a6002 lcd displej vibe lazada

Be careful as the touchscreen will broke easily in little pieces when prying up. Introduce plastic opening tools, turning around to separate frame and touchscreen.

Be careful as the touchscreen will broke easily in little pieces. As the touchscreen will probably be broken in a lot of pieces, put cristal tape on remaining touchscreen fragments.

Cut to the right size so there are no remainming free space, which would allow dirt to squeeze through! Cancel: I did not complete this guide.

Badges: 7. You saved my day!

Iconia One 10 | Tablets | Acer United States

It was the first time for me to repair the touchscreen of a tablet and everything works fine. For the single steps it is therefore necessary to order a set of tools including the double-sided tape.

This was not a problem because the cooper plates were stucked at the frame with a plastic peace and could be easily solved.

The connectors could be also solved easily.

Acer Iconia Tab 10 A3-A40 – Display

Otherwise it could be that the back cover doesn’t fit correctly. Getting all the old tape off took the longest. The other things took less than 10 minutes.

I used double sided 3M molding tape. Thanks again….

Help Translate iFixit. Difficulty Moderate. Steps Time Required 1 – 2 hours. Sections 1.

Touchscreen 29 steps. Flags 1. Member-Contributed Guide An awesome member of our community made this guide.

Tools Buy these tools. Touchscreen Available for sale on Ebay.

Double-Sided Tape Not for sale. Step 1 Back cover. Add a comment.

Add Comment Cancel. Step 2.

Step 3 Wifi antena. Step 4 Volume buttons circuit board.

04.02.2020 – Visit Shop. Email to friends Share on Facebook – opens in a new window or tab Share on Twitter – opens in a new window or tab Share on Pinterest – opens in a new window or tab. PayPal preferred. Badges: 7. Step 11 Touchscreen connector.

Step 5. Step 6.

Step 7 Logicboard – touchscreen circuit board flex cable. Step 8.

Help Translate iFixit. Please enter a valid postcode. Acer iconia tab 10 a3 a40 a6002 lcd displej Get the item you ordered or your money back.

Step 9 Back Camera. Step 10 Power and speakers connectors. Step 11 Touchscreen connector. Step 12 Display cable. Step Step 14 Vibrator.

Step 15 Speakers. Step 16 Speakers. Step 17 Logic board. Step 19 Wifi antena. Step 20 Aluminium tape. Step 21 Metal plate.

I bought it on behalf of my mother-in-law, and would like one for myself too. Asus Zenfone 4 ZE554KL Dual Sim 5.5quot Smart Phone Sold by Cheapest Electrical.

Step 22 Touchscreen circuit board. Step 23 Metal plate.

To avoid further troublesome, Please double check it is the correct one you need. If you have questions about this VAT, please contact the seller. Acer iconia tab 10 a3 a40 a6002 lcd displej Single Step Full Guide. Steps

Step 24 Display. Step 25 Broken touchscreen removal. Step 28 Apply foamed double-sided tape. Step 29 New touchscreen. Almost done! To reassemble your device, follow these instructions in reverse order.

You’re Finished! Author with 2 other contributors.

Samsung acer iconia tab 10 a3 a40 a6002 lcd displej kl550 4ggprice

Excellent, just waiting for my battery to charge up so I can test it. Too complicated for me, one cable broken. Better to order glass after successful dissassembly.

Additionally I have some remarks: 1 The named tools are useful and were needed. Perfekte Anleitung!

Acer iconia tab 10 a3 a40 a6002 lcd displej hydrometer

Vielen Dank! Single Step Full Guide. Small – px Medium – px Large – px. View Statistics:.